- ‘Pocket drones’: U.S. Army developing tiny surveillance tools for the next big war
- Belgian cafe posts sign: Dogs allowed, but Jews stay out
- Gen. Dempsey: Pentagon studying Russian readiness plans not viewed ‘for 20 years’
- John McCain: Botched, two-hour execution of murderer is ‘torture’
- House GOP ready to move border bill
- Bomb squad called after live WWII artillery washes on Cape Cod beach
- HAYDEN: Intelligence, evidence and the case against Russia
- Ohio university quiz implies atheists are naturally smarter than Christians
- Rep. Henry Cuellar on border crisis: ‘Playing defense on the one-yard line’
- Activists vow to occupy fast-food restaurants to get higher pay
U.S. Mint testing new metals to make coins cheaper
Question of the Day
PHILADELPHIA (AP) — When it comes to making coins, the Mint isn’t getting its two cents worth. In some cases, it doesn’t even get half of that. A penny costs more than two cents and a nickel costs more than 11 cents to make and distribute. The quandary is how to make coins more cheaply without sparing our change’s quality and durability, or altering its size and appearance.
A 400-page report presented last week to Congress outlines nearly two years of trials conducted at the Mint in Philadelphia, where a variety of metal recipes were put through their paces in the massive facility’s high-speed coin-making machinery.
Evaluations of 29 different alloys concluded that none met the ideal list of attributes. The Treasury Department concluded that additional study was needed before it could endorse any changes.
“We want to let the data take us where it takes us,” Dick Peterson, the Mint’s acting director, said Wednesday. More test runs with different alloys are likely in the coming year, he said.
The government has been looking for ways to shave the millions it spends every year to make bills and coins. Congressional auditors recently suggested doing away with dollar bills entirely and replacing them with dollar coins, which they concluded could save taxpayers some $4.4 billion over three decades. Canada is dropping its penny as part of an austerity budget.
To test possible new metal combinations, the U.S. Mint struck penny-, nickel- and quarter-sized coins with “nonsense dies” — images that don’t exist on legal tender (a bonneted Martha Washington is a favorite subject) but are similar in depth and design to real currency.
Test stampings were examined for color, finish, resistance to wear and corrosion, hardness and magnetic properties. That last item might be the trickiest, as coin-operated equipment such as vending machines and parking meters detect counterfeits not just by size and weight but by each coin’s specific magnetic signature.
Except for pennies, all current U.S. circulating coins have the electromagnetic properties of copper, the report said.
A slight reduction in the nickel content of our quarters, dimes and nickels would bring some cost savings while keeping the magnetic characteristics the same. Making more substantial changes, like switching to steel or other alloys with different magnetic properties, could mean big savings to the government but at a big cost to coin-op businesses, Peterson said.
The vending industry estimates it would cost between $700 million and $3.5 billion to recalibrate machines to recognize coins with an additional magnetic signature. The Mint’s researchers reached a lower but still pricey estimate of $380 million to $630 million.
Another challenge for the Mint is the rising cost of copper (used in all U.S. coins) and nickel (used in all except pennies).
Only four of the 80 metals on the periodic table — aluminum, iron (used to make steel), zinc and lead — cost less than copper and nickel, the report stated. Lead isn’t an option because of its potential health hazards.
“Pricing of steel, aluminum and zinc are pretty close to each other … there are promising alternatives for the nickel, dime and quarter,” Peterson said. “There wouldn’t be any advantage to shift the composition of the penny, so we offset that cost with (savings from) other denominations.”
Pennies may not be cost-efficient, but they won’t be getting pinched as long as they’re in demand.
“We produce 6 billion pennies a year,” Peterson said. “Our customers want them.”
TWT Video Picks
Second- and third-stringers eye 2016 if front-runner stumbles
- 'We're coming for you, Barack Obama': Top U.S. official discloses threat from ISIL terrorists
- Russia shipping sophisticated weapons systems to Ukraine separatists
- NAPOLITANO: What if our democracy is a fraud?
- John McCain: Botched, two-hour execution of murderer is 'torture'
- Michelle Obama says money in politics is bad, asks donors for 'big, fat check'
- EDITORIAL: Detroit's water 'spigot bigots'
- Brian Kelly, Notre Dame ready for different route to title
- Ted Nugent loses second casino gig for 'racist remarks'
- Obama orders Pentagon advisers to Ukraine
- White House readies for House GOP impeachment push: 'Foolish' to ignore
Obama's biggest White House 'fails'
Celebrities turned politicians
Athletes turned actors
20 gadgets that changed the world
Fighting in Iraq